View Single Post
Unread 10-24-2021, 03:14 PM   #3
Randall5
Registered User
 
Join Date: Jan 2004
Location: Seekonk, MA
Posts: 25
John,

Thanks for the reply. I guess I was thinking I would be doing one coat, not two. The idea was to get first coat pushed into the mesh, then add more mud where the strips will go, set the strips, and then fill in the remaining areas on the wall, and then screed.


Is two coat easier for the less experienced, than a one-coat?
__________________
Randy
Randall5 is offline   Reply With Quote