View Single Post
Unread 09-21-2008, 09:13 PM   #6
Registered User
Join Date: Sep 2008
Posts: 5
The one thing I'm worried about patching with a scrap piece would be the thickness of the patches at the fixed screw holes (ie furring issue).

Davy, once patched how would I go about testing it? The height of the hole is probably about the height of the curb or close to it (water breaching the curb is my delima).

Just to try to educate myself... When would water possibly go around the screw and through the liner? Being uneducated in the matter If the water level was that high I would be experiencing 1.5" standing water in the shower.
Jeremy_M is offline   Reply With Quote