View Single Post
Unread 09-21-2008, 08:46 PM   #3
JTG
Registered User
 
JTG's Avatar
 
Join Date: Nov 2002
Location: Ballard, WA
Posts: 4,495
Jeremy
If it is not to much of a PIA I would remove the boards and goop the holes with the glue they use for joining pieces of the pan material you used.
If you can't or don't want to do that then I would go the silicone route buy you will need to have something like a small puddy knife that you can use to really force that stuff in there real well.
Good Luck
JTG
__________________
Jerry

Santa Seattle
Ballard

http://www.facebook.com/home.php#!/SantaJerryinBallard
JTG is offline   Reply With Quote