View Single Post
Unread 04-10-2021, 10:24 AM   #4
Redtailpdx
Registered User
 
Join Date: May 2020
Posts: 13
Thanks for the tips, I will try a regular lippage control system with clips and wedges.

Good tip on the extra effort to make the kerdi as flat as possible Tool Guy. This is an old house with very uneven walls and I spent a lot of time shimming & shaving to get everything flat under the kerdi board. I'm happy with it now even though it's not NASA levels of precise but it is done to the best of my ability.

Thanks again
__________________
Zachary
Redtailpdx is offline   Reply With Quote