View Single Post
Old 12-12-2008, 01:34 PM   #1
Registered User
TampaDoc's Avatar
Join Date: Apr 2008
Location: St.Petersburg
Posts: 25
Curbless shower Question

Well I've got everything done on the upstairs bath. The downstairs however has had no movement. The medicade waiver that was suppose to pay for the ADA stuff hasn't come through and I need to have that bath finished. So I guess I'm doing it. Here is the big question. I'm going curbless on a cement slab with Kerdi. If it goes to 3/4 of an inch above grade for the slope, that's pretty thin. It would seen impracticle to mesh in that thin of a mud bed. Do you just do the mud bed on the cement with no metal?

Somone enlighten me...

My own slave laborer
TampaDoc is offline   Reply With Quote