View Single Post
Old 12-15-2017, 10:55 PM   #7
Tool Guy - Kg
Moderator -- Wisconsin Kitchen & Bath Remodeler
Tool Guy - Kg's Avatar
Join Date: Feb 2005
Location: Oak Creek, WI
Posts: 20,173
With finishing work being done on a pivoting miter saw, the blade not cutting dead straight is one of the bigger concerns. Especially on wood wider than 2.5-3” or so. And especially with that many teeth. While so many teeth will usually leave a nice smooth cut on the wood, I’m guessing it’s too many with too little chance for sawdust to be extracted. Do you know if it’s an alternate top bevel grind?

Tonto Goldstein….. but my friends call me Bubba
Tool Guy - Kg is offline   Reply With Quote