View Single Post
Old 10-20-2017, 08:21 AM   #6
Kman's Avatar
Join Date: Nov 2006
Location: NW Arkansas, Ozark Mountains
Posts: 9,563
You'll want the flooring to be within 2% of the subfloor. Keep the HVAC running so the humidity is at a constant level. Some wood takes a little longer to acclimate, you just have to wait.

As Jeff mentioned, the Poloplaz is a good one. I've used it a few times in the past with good results.

If you want to go parallel to the joists, add another layer of plywood.

Get a good number of screws in that floor while you have the chance. Replace any questionable parts. You won't get the chance to do it again.

The top ten reasons to procrastinate:

Kman is offline   Reply With Quote