Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Search Forums

Sponsors


Showing results 1 to 25 of 500
Search took 0.23 seconds.
Search: Posts Made By: jadnashua
Forum: Tile Forum/Advice Board 11-24-2021, 05:21 PM
Replies: 4
Views: 174
Posted By jadnashua
You could just put in a second shower drain with...

You could just put in a second shower drain with grate and dump the tub into it via an air gap, or, if the floor is sloped to a linear drain, just dump it on the floor.

The best adhesive to bond...
Forum: Tile Forum/Advice Board 11-24-2021, 02:09 PM
Replies: 19
Views: 508
Posted By jadnashua
Without washers, it's fairly easy to have the...

Without washers, it's fairly easy to have the head go through the outer layer of the foam board. The concave washer also makes it easier to recess the head so you can have a flat surface once you...
Forum: Tile Forum/Advice Board 11-23-2021, 06:55 PM
Replies: 19
Views: 508
Posted By jadnashua
The tar paper is there to prevent the wooden...

The tar paper is there to prevent the wooden flooring from sucking moisture out of the deck mud before it gets a chance to chemically cure. You will have poked a bunch of holes in it when tacking...
Forum: Tile Forum/Advice Board 11-21-2021, 10:16 PM
Replies: 38
Views: 1,550
Posted By jadnashua
You do want a gap between the tile and the...

You do want a gap between the tile and the hardwood, but what you cover it with is up to you.

Is there a height difference between the tile and the hardwood? That will make a difference in the...
Forum: Tile Forum/Advice Board 11-21-2021, 06:53 PM
Replies: 11
Views: 536
Posted By jadnashua
I was thinking a wall...but as to cost, if you...

I was thinking a wall...but as to cost, if you don't have the tools, it still may save to tear it out. Be careful when grinding to not make divots or depressions, or setting your tile becomes harder...
Forum: Tile Forum/Advice Board 11-19-2021, 06:32 PM
Replies: 11
Views: 536
Posted By jadnashua
If you have to buy the tool, it may just be...

If you have to buy the tool, it may just be cheaper, cleaner, and faster to just replace the panels...the thinset dust is also carcinogenic, so you really do want to use dust collection and protect...
Forum: Tile Forum/Advice Board 11-18-2021, 01:35 PM
Replies: 35
Views: 1,626
Posted By jadnashua
Depending on the shape of the notches, let's say...

Depending on the shape of the notches, let's say you're using a square notched trowel, IF you get the desired 100% coverage when setting the tile, a 3/16" notch should end up half of that, or 3/32"...
Forum: Tile Forum/Advice Board 11-17-2021, 06:22 PM
Replies: 19
Views: 508
Posted By jadnashua
If you were paranoid, you could also seal the...

If you were paranoid, you could also seal the Kerdiboard seams with KerdiFix, it just costs more! You don't have a choice if you use WediBoard. Schluter did the research and testing to validate...
Forum: Tile Forum/Advice Board 11-17-2021, 06:15 PM
Replies: 9
Views: 246
Posted By jadnashua
As long as the mudbed is stable, you'll actually...

As long as the mudbed is stable, you'll actually get a stronger bond and often an easier install if it's still damp as it won't suck moisture out of your thinset when you spread it...keeping it the...
Forum: Tile Forum/Advice Board 11-16-2021, 06:34 PM
Replies: 9
Views: 246
Posted By jadnashua
I've read some stuff from one (ancient, still...

I've read some stuff from one (ancient, still plumbing in his 80's) plumber that actually does put his copper pans in on a slope...takes more skill and time, but then, it works.

I agree, though,...
Forum: Tile Forum/Advice Board 11-16-2021, 11:28 AM
Replies: 19
Views: 508
Posted By jadnashua
The three biggest shower waterproofing foam...

The three biggest shower waterproofing foam panels that I'm aware of are:
- KerdiBoard
- WediBoard
- Hydroban board

There are some other, lesser known copy cats. KerdiBoard is the oldest, and...
Forum: Tile Forum/Advice Board 11-15-2021, 01:44 PM
Replies: 6
Views: 174
Posted By jadnashua
Some tile are quite flat, some are not...that is...

Some tile are quite flat, some are not...that is what often determines the minimum required thinset layer. You don't need much thickness if everything is very smooth and flat.

WediBoard is...
Forum: Tile Forum/Advice Board 11-15-2021, 12:00 AM
Replies: 16
Views: 413
Posted By jadnashua
You want to wait at least a good, full 24-hours...

You want to wait at least a good, full 24-hours after the last bit was installed before you consider flood testing a Kerdi shower. Wedi panels and some of the Noble membranes, when you use their...
Forum: The Mud Box 11-14-2021, 10:34 PM
Replies: 5
Views: 354
Posted By jadnashua
Most suppliers of metal roofs will have...

Most suppliers of metal roofs will have engineered snow guards that get installed on the roof to help prevent the whole thing sliding off at once like that. I've not tried to install any, so don't...
Forum: Tile Forum/Advice Board 11-14-2021, 06:09 PM
Replies: 16
Views: 413
Posted By jadnashua
Thinset by itself is not waterproof, and will...

Thinset by itself is not waterproof, and will wick moisture. When it's between the two hydrophobic Kerdi sheets, and the thinset isn't too thick, moisture doesn't get very far into the joint. But,...
Forum: Tile Forum/Advice Board 11-14-2021, 12:47 AM
Replies: 16
Views: 413
Posted By jadnashua
The cement continues to crystallize for at least...

The cement continues to crystallize for at least 28-days, and in reality, almost forever...IOW, if the joint had the fleece properly embedded, it will only get more solid over time. A flood test...
Forum: Tile Forum/Advice Board 11-13-2021, 10:51 PM
Replies: 4
Views: 206
Posted By jadnashua
On your corner seams, put the normal alkali...

On your corner seams, put the normal alkali resistant mesh tape on them, and then the thinset...wait for things to cure, then do your RedGard. Depending on the type of cbu you use, HardieBacker...
Forum: Cleaning, Restoration and Sealing 11-12-2021, 06:12 PM
Replies: 15
Views: 860
Posted By jadnashua
A couple of things you might try...no guarantees!...

A couple of things you might try...no guarantees!

IN addition to what's already been suggested, you might try Moldex solution. I tend to order it from Home Depot, as they seem to have the best...
Forum: Tile Forum/Advice Board 11-12-2021, 05:58 PM
Replies: 11
Views: 290
Posted By jadnashua
Industry standards call for the minimum grout...

Industry standards call for the minimum grout joint to be no less than 3x the min/max differences of the tile involved in sizes. But, there's nothing that says you can't go larger if you want. ...
Forum: Tile Forum/Advice Board 11-12-2021, 04:18 PM
Replies: 4
Views: 193
Posted By jadnashua
FWIW, it's actually a tricky procedure to make...

FWIW, it's actually a tricky procedure to make something long, thin, yet solid enough to actually lay flat precisely, which is, I think one reason why they are expensive.

Their least expensive...
Forum: Tile Forum/Advice Board 11-11-2021, 02:30 PM
Replies: 3
Views: 171
Posted By jadnashua
I'd want to put something on the painted wall...

I'd want to put something on the painted wall prior to trying to mount them...something like Mapei's EcoPrimGrip primer would seem to work.

As to sealers...carefully read the instructions...most...
Forum: Tile Forum/Advice Board 11-10-2021, 05:30 PM
Replies: 10
Views: 564
Posted By jadnashua
Every reliable company that makes waterproofing...

Every reliable company that makes waterproofing for showers also has some VERY specific installation instructions that must be followed for it to work, and technically, for it to pass a...
Forum: Tile Forum/Advice Board 11-09-2021, 09:15 PM
Replies: 20
Views: 797
Posted By jadnashua
You could caulk it. I'd use some foam backer rod...

You could caulk it. I'd use some foam backer rod to help save some material, and it actually makes for a more reliable joint. Choose a paintable caulk.
Forum: Tile Forum/Advice Board 11-09-2021, 08:41 PM
Replies: 24
Views: 900
Posted By jadnashua
If the mortar was burned in properly, trying to...

If the mortar was burned in properly, trying to chip it off on the CBU will probably take divots out. If not, it may chip off fairly easily. If they did not put mortar UNDERNEATH the cbu, it should...
Forum: Tile Forum/Advice Board 11-09-2021, 06:50 PM
Replies: 24
Views: 900
Posted By jadnashua
It depends somewhat on if you're going to try to...

It depends somewhat on if you're going to try to do this yourself, or pay someone to remove the mortar, and how much you value your time (or the labor you'd have to pay) versus buying new tile.
...
Showing results 1 to 25 of 500

 
Forum Jump

All times are GMT -6. The time now is 05:31 AM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC