Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Ceramic Tile Advice Forums - John Bridge Ceramic Tile (https://www.johnbridge.com/vbulletin/index.php)
-   Tile Forum/Advice Board (https://www.johnbridge.com/vbulletin/forumdisplay.php?f=1)
-   -   1/2 inch boards/what size screws? (https://www.johnbridge.com/vbulletin/showthread.php?t=36883)

rockjet 05-30-2006 07:36 PM

1/2 inch boards/what size screws?
 
hi again....i know,i know, i'm a pain in the butt!....


another quick question, please.

i'm using 1/2" hardibacker cement boards.

are the hardibacker 1 1/4" the correct size for the 1/2" boards.??

they will be going directly into studs.

thanx!..........mike

MudMaker 05-30-2006 07:42 PM

Q: What type of fastener do you recommend for floor and wall applications of Hardibacker?
A: In compliance with the tile industry, James Hardie recommends 1-1/4" long galvanized or stainless steel roofing nails (0.121" shank x 3/8" HD) or 1-1/4" long corrosion resistant ribbed waferhead screws (No. 8-18 x 3/8" HD).
:)


All times are GMT -6. The time now is 05:54 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC