Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Ceramic Tile Advice Forums - John Bridge Ceramic Tile (https://www.johnbridge.com/vbulletin/index.php)
-   Tile Forum/Advice Board (https://www.johnbridge.com/vbulletin/forumdisplay.php?f=1)
-   -   building out wall to be even with tile (https://www.johnbridge.com/vbulletin/showthread.php?t=31657)

medik13 01-28-2006 10:12 AM

building out wall to be even with tile
 
Hello all!

I just recently had my Master shower tiled with 1/2" marble. the installer used about another 3/8" - 1/2" of setting material and bullnosed the end pieces. However the setting material is seen and sticks out 1/2" past the greenboard that is jointed to the durock.

What can I do to build out the wall so it is nicely finished to the bullnose. Can I add another 1/2" sheet of drywall ontop of the greenboard, or should I build out the wall with 1/2" inch of two coat veneer plaster?

muskymike 01-28-2006 01:50 PM

Hi there, welcome! Gotta first name we can use? You can add the drywall. They should have 3/8" dw too if the 1/2" is too much.

medik13 01-28-2006 04:37 PM

3/8"??? All I have around here is 1/2. Where can I get 3/8? Thanks for the reply...

Sean

John Bridge 01-28-2006 05:24 PM

Hi Sean, Welcome aboard. :)

Don't know where you are. 3/8 sheetrock is quite common. Home Depot has it from time to time. A drywall supplier in your area will certainly have it. :)

davem 01-28-2006 05:27 PM

Yep what John said, I got 8 foot 3/8" at HD a couple weeks ago. Welcome Sean. :)

medik13 01-28-2006 08:47 PM

I can just secure it to the studs over existing greenboard, correct??? WOW...Thanks for the welcome and speedy replies!


All times are GMT -6. The time now is 01:50 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC