Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Ceramic Tile Advice Forums - John Bridge Ceramic Tile (https://www.johnbridge.com/vbulletin/index.php)
-   Cleaning, Restoration and Sealing (https://www.johnbridge.com/vbulletin/forumdisplay.php?f=16)
-   -   Quartzlock2 Turning Yellow (https://www.johnbridge.com/vbulletin/showthread.php?t=128710)

pilot25 02-06-2020 05:30 PM

Quartzlock2 Turning Yellow
 
Hoping to resurrect this thread. I see the original poster didn’t follow up.

I used quartzlock2 on tile about 3 years ago and it’s all turned yellow. The tile is in a bathroom but never been exposed to water. Only swifter mop cleaner. Comparing the color to the original anything that had been touched by cleaner has been discolored.

I have tried grout cleaner, soft scrub, and straight white vinegar to no change.

Has anyone else had this problem and what did you do about it? Supposed to be hassle free grout but clearly I should have sealed it when I installed it.

cx 02-06-2020 06:39 PM

Welcome back, Pilot. :)

I've split your post from the other member's thread to avoid confusion on both issues.

I think our folks who may want to help will need to know the color of your grout and the specific cleaner(s) you used that you indicated caused the color change.

Photos may be helpful, too.

I'm not at all sure what a penetrating sealer might do to that type of grout, if anything, but I'm reasonably sure it would not keep it from turning yellow when a cleaner was used.

My opinion; worth price charged.


All times are GMT -6. The time now is 08:52 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC