Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Ceramic Tile Advice Forums - John Bridge Ceramic Tile (https://www.johnbridge.com/vbulletin/index.php)
-   Tile Forum/Advice Board (https://www.johnbridge.com/vbulletin/forumdisplay.php?f=1)
-   -   Tiling Walls (https://www.johnbridge.com/vbulletin/showthread.php?t=59686)

AlexLNB7 02-21-2008 10:42 AM

Tiling Walls
I took a look around the forum and really couldnt find anything specific to what I am doing. I currently have mold resistant drywall around the toilet and the vanity. I want to tile about 4.5 feet up with 12x12 marble tile. My question is should I put primer on the greenboard first and second what should I use for the joints? mastic, thinset or joint compound? and what about tape over the joint?


ddmoit 02-21-2008 10:48 AM

Welcome to the forum, Alex.:)

Leave the drywall bare where you intend to tile. Because your tiles are marble and large, I would not use mastic. Get a good, white, modified thinset instead. Your tiles are large enough that you don't really have to mud the joints before you tile. I would tape them with an alkali-resistant mesh tape as you tile though.

All times are GMT -6. The time now is 05:48 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC