Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Ceramic Tile Advice Forums - John Bridge Ceramic Tile (https://www.johnbridge.com/vbulletin/index.php)
-   Tile Forum/Advice Board (https://www.johnbridge.com/vbulletin/forumdisplay.php?f=1)
-   -   Shelves in niche (https://www.johnbridge.com/vbulletin/showthread.php?t=57021)

gpeter7761 12-10-2007 08:21 PM

Shelves in niche
 
I've looked at all the picture on the site and am wondering what material is used to make the shelf in the niche??

Brian in San Diego 12-10-2007 08:29 PM

They can be made with a number of materials. In my case I made mine with a piece of limestone. I've seen marble and granite. You can make them with whatever works and looks good to you.

Brian

Scubadoo 12-10-2007 08:30 PM

Well, after asking the same question and also talking to a guy who does granite counters etc, I think I'm going to get a piece of granite tile, 1/2 in thick and cut it to size for the shelf and finish the edge. The bottom won't be finished but the feedback I got is it doesn't matter so much, not like looking at the bottom of unfinished tile.

austinpower 12-10-2007 11:15 PM

Yup, I like 1/2" granite that I can pick up as scraps at a local countertop place.

Scubadoo 12-11-2007 10:53 PM

I haven't found any granite fabricators around here that use anything less than 2cm. I was going to try to get a piece of 1/2" granite floor tile to use to make shelves as I don't want 2cm or more thick.

sgesele 12-12-2007 11:46 AM

I just did the same thing, purchased a granite tile, had the bottom polished and two opposing edges finished with a full bullnose. The shelves look great.


All times are GMT -6. The time now is 03:15 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC