Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Ceramic Tile Advice Forums - John Bridge Ceramic Tile (https://www.johnbridge.com/vbulletin/index.php)
-   Tile Forum/Advice Board (https://www.johnbridge.com/vbulletin/forumdisplay.php?f=1)
-   -   Arabesque 3/4" clay tiles. (https://www.johnbridge.com/vbulletin/showthread.php?t=115813)

alex.h 03-03-2015 07:07 PM

Arabesque 3/4" clay tiles.
 
1 Attachment(s)
So here is the project a fireplace


http://www.johnbridge.com/vbulletin/...1&d=1425430925

And here is the tile.

http://www.johnbridge.com/vbulletin/...1&d=1425430959

And it drinks water like a drunk at 3pm.

http://www.johnbridge.com/vbulletin/...1&d=1425431017



So here is the plan so far. Soak the tiles. Ultralite mortar.we will figure the grout after. A custom cement mix or classic ultracolor S.
And sadly the plywood has to stay. No durock or gyprock.

Any input on the cement? The absorbtion of these tiles?

And the patern sould be this.
There is going to be a wood strips on the corners to make the corner. And it sould be "full to full"



http://www.johnbridge.com/vbulletin/...1&d=1425431017

Tiger Mountain Tile Inc 03-03-2015 07:37 PM

Hi Alex,

I've been trying to figure out your links. They seem to always go to the photo showed. It should be that the only thing that you need is the "manage attachements" button below. If you've discovered some sort of glitch please let us know. :)

cpad007 03-04-2015 10:24 AM

I get the same: 4 links...and all are of the pic in the thread.


All times are GMT -6. The time now is 11:48 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC