Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Ceramic Tile Advice Forums - John Bridge Ceramic Tile (https://www.johnbridge.com/vbulletin/index.php)
-   Tile Forum/Advice Board (https://www.johnbridge.com/vbulletin/forumdisplay.php?f=1)
-   -   Shower Floor/Wall Joints (https://www.johnbridge.com/vbulletin/showthread.php?t=28511)

DIYKC 10-24-2005 11:54 AM

Shower Floor/Wall Joints
OK all the tile is now installed. It was actually fun with my new Felker TM 75. No problem right out of the box except I don't like the little rubber flap at the back as it deflects water down onto the floor, but no big deal it's a great tool. Should of bought it years ago. I digress. Onto the question.

The floor wall joint.

Should this be caulk. If yes what type for a shower floor. If not can I just grout it.

Grout type . Any specific recommendations for shower ?

Also any recommmendations on sealer type.Lastly. I now need a custom bi-fold shower door. Does anyone know where I can order one or pick one up in the Houston area ?

Thanks in advance


bbcamp 10-24-2005 11:58 AM

You caulk the wall-to-floor and wall-to-wall joints with silicone or siliconized acrylic caulks. You can find color matched caulk at your grout supplier.

Modified grout, sanded for groutlines 1/8" and wider, unsanded for 1/8" or smaller.

Sealer: stay away from Tile-Lab.

I dunno on the door.

DIYKC 10-24-2005 03:04 PM

Thank you again.


All times are GMT -6. The time now is 08:13 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC