Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Ceramic Tile Advice Forums - John Bridge Ceramic Tile (https://www.johnbridge.com/vbulletin/index.php)
-   Cleaning, Restoration and Sealing (https://www.johnbridge.com/vbulletin/forumdisplay.php?f=16)
-   -   Stone sealer drips on CI tub...? (https://www.johnbridge.com/vbulletin/showthread.php?t=66483)

David Meiland 09-17-2008 07:22 PM

Stone sealer drips on CI tub...?
 
Customer alerted me today to some very faint drips on a new Kohler cast iron tub. The tub is in a slate deck with a limestone backsplash, and the stone was sealed after the tub was set. The installer used an Aqua-Mix sealer, I believe Enrich 'n Seal. It appears that some drops of the sealer hit the inside of the tub near the rim and ran down. It is barely visible but it's there. The owner cleaned the tub with Soft Scrub, and that's all that's been done so far, aside from me scraping at it with my thumbnail.

Is there anything that dissolves sealers like this?

Davestone 09-17-2008 07:31 PM

You might try this....http://www.aquamix.com/products/pg_d...2462&pgid=9833

The Kid 09-17-2008 07:36 PM

Try using a little of the same sealer on a scrub pad. It should reemulsify the sealer in question and wipe right off.

Mike2 09-17-2008 07:38 PM

David, I found this on their website. Aqua Mix recommends 3 products for removal of Enrich 'N' Seal.
Sealer and Coating Remover that Dave links to above

Heavy Duty Tile & Grout Cleaner

Stone Deep Clean
All of the above are Aqua Mix products. For detailed instructions, here on their website http://www.aquamix.com/resource%5Fce.../#problem29759.


All times are GMT -6. The time now is 08:01 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2018 John Bridge & Associates, LLC