Custom Size Kerdi System [Archive] - Ceramic Tile Advice Forums - John Bridge Ceramic Tile


View Full Version : Custom Size Kerdi System

02-05-2007, 08:11 PM
I was excited to see the information about the Kerdi System, but I may have a problem. We have a tract home modular acrylic shower in it's own little "closet" that needs to be replaced. We want to tear it out and put in a tile shower. Unfortunately the opening is for about a 34" wide shower pan and it could be square, or a little deeper than 34". Can the Kerdi system be cut down to about 34" square? Thanks!

Sponsored Links

02-05-2007, 08:19 PM
No problem to trim the Kerdi tray to fit.

02-05-2007, 09:14 PM
You just want to make sure you trim it as evenly as possible on all sides or you'll end up with the slope at different heights. It'll make it more difficult to set your bottom row of tile level.


02-06-2007, 09:12 AM
Love your pix!

02-06-2007, 02:38 PM
is this a slab?