miter cuts inside and outside 90s [Archive] - Ceramic Tile Advice Forums - John Bridge Ceramic Tile

PDA

View Full Version : miter cuts inside and outside 90s


nagurdj
01-23-2005, 01:37 PM
I plan to use a 4" bullnose for a trim above the new bathroom floor. There are some inside and outside 90s that I need help with. For the inside 90 I plan on laying the bullnose up to the joint and using grout to fill the angle. However, this does not make sense to me for the outside 90. The grout would have to take the wear and tear of any foot traffic. Do I need to find a special moulded tile for that application? Don

Sponsored Links


Davestone
01-23-2005, 01:48 PM
If it's a 4" bullnose they probably make the outside corner version also, it's a bullnose on two edges like an ..L...Or you can get a cove, or sanitary base corner,but i'd look for the outside corner version first. :)