FRP installation [Archive] - Ceramic Tile Advice Forums - John Bridge Ceramic Tile

PDA

View Full Version : FRP installation


mapromonyc
06-08-2019, 08:06 AM
Hi,

This might be a dumb question but I wanted to know how to deal with panel installation in a sloped room. I am ready to install FRP on my wall but my floors are sloped. I installed the quarry base cove and noticed there is a slope at least 3/4 to 1" on my walls. What would you suggest I do in order to get the panels level? I want to install them as close to the base cove as possible.

TIA

Marc

Sent from my SM-N960U using Tapatalk

Sponsored Links


Carbidetooth
06-08-2019, 09:18 AM
1.Measure down from level line on wall to base at panel width intervals.
2.Transfer slope dimensions to panels and cut
3.Test fit and install

Redlands Okie
06-08-2019, 06:06 PM
You can also use a cheaper price of paneling to create a pattern for fitting if needed instead of the high dollar FRP

mapromonyc
06-08-2019, 09:24 PM
Thank youp

Sent from my SM-N960U using Tapatalk