How much Redi Poxy required ? [Archive] - Ceramic Tile Advice Forums - John Bridge Ceramic Tile

PDA

View Full Version : How much Redi Poxy required ?


keevel
05-23-2019, 03:28 PM
Greetings:
I'll try and keep this short. My wife and I had a house built that we are finishing the inside. We had plumbing installed and had the contractor install the bath tub in the guest bathroom and install the Tile Redi 30x60 shower pan. The contractor apparently had no idea what the Redi Poxy was for and discarded it. I find that Redi Poxy is available in three quantities, 6, 9, and 12 lbs. Does anyone have an idea how much epoxy I will need to tile the pan and curb ? Any help is appreciated.

Sponsored Links


thuffner3
05-23-2019, 07:36 PM
Hi Keeval,
Seems to me we had 2- 9lb kits and it was scarey tight.
We were using a 1/4 square notch for 12 x 24 tiles.
I would feel better with 12 and 9 if not 2- 12's.
Neil

keevel
05-24-2019, 11:18 AM
Thanks Neil, I'm using 1 ft by 2 ft tile for the pan. The wife will be happy for me to get going on this....

Tool Guy - Kg
05-24-2019, 08:24 PM
12” x 24” tile for the pan?!!!