Tile Pro Advice Needed - Flatness ANSI A108.02 [Archive] - Ceramic Tile Advice Forums - John Bridge Ceramic Tile


View Full Version : Tile Pro Advice Needed - Flatness ANSI A108.02

01-08-2017, 11:53 PM
Hello John Bridges Community!

Sponsored Links

01-09-2017, 07:26 AM
I cant tell from the pictures if you are using the pennies to make the level *level* or if there are peaks and valleys under the level itself.

Your floor needs to be *flat* but not necessarily *level*. If you put the level down on the floor (no pennies), can you see light peering through in spots under the level? If so, thats what you might be able to complain about.

Its also possible that the contractor did in fact flatten out your subfloor, but didnt install the tiles flat to each other.

01-09-2017, 11:24 AM
Welcome, Millie. :)

Appears you've deleted all the useful information from your post, making it difficult for us to be of any help. Was that your intent?