Ceramic Tile Advice Forums - John Bridge Ceramic Tile

Welcome to John Bridge / Tile Your World, the friendliest DIY Forum on the Internet


Advertiser Directory
JohnBridge.com Home
Buy John Bridge's Books

Go Back   Ceramic Tile Advice Forums - John Bridge Ceramic Tile > Tile & Stone Forums > Professionals' Hangout

Sponsors


Reply
 
Thread Tools Search this Thread
Old 12-11-2007, 09:06 AM   #1
Ed Vincent
Registered User
 
Join Date: Nov 2007
Location: Santa Maria, Calif.
Posts: 2
Certified Tile Inspector Needed

Good Morning one and all. I am an inspector, all products, and I have been requested to inspect a 600 sq.ft. Ceramic floor in Long Beach, Calif. The jobsite is about 400 plus miles round trip, and I am looking for a certified inspector for tile that is a little closer than I. If anyone out there is interested in performing this inspection please let me know
Thanks
Ed Vincent dba Mr. Ed's Inspection Service
Ed Vincent is offline   Reply With Quote
Sponsored Links
Old 12-11-2007, 09:25 AM   #2
Marge
Registered User
 
Marge's Avatar
 
Join Date: Nov 2004
Location: Arizona
Posts: 14,636
Hi Ed, welcome to the forum.

I have moved your thread over to the Pro's Hangout where it might better get the attention you need. Good luck!
__________________
Marge------
Marge is offline   Reply With Quote
Old 12-11-2007, 09:37 AM   #3
Hamilton
Bucket abuser
 
Hamilton's Avatar
 
Join Date: Jan 2005
Location: Wildomar Ca
Posts: 9,177
Here is a link to a company that is located in southern california.CTaSC Hope all works out well.
__________________
Jack Hamilton

Hamiltontileandstone.com

Temecula Tile and Natural stone contractor
Hamilton is offline   Reply With Quote
Old 12-11-2007, 10:21 AM   #4
Dave Gobis
da Man!
 
Dave Gobis's Avatar
 
Join Date: May 2001
Location: Racine, WI.
Posts: 5,230
Or CTIOA is a little closer, 310 574-7800
Dave Gobis is offline   Reply With Quote
Old 12-11-2007, 06:05 PM   #5
Ed Vincent
Registered User
 
Join Date: Nov 2007
Location: Santa Maria, Calif.
Posts: 2
HI DAVE, I hope all is well, I enjoy your articiles....I appreciate all of the replies, but I have just been informed that the installation is being performed as we speak, SOOOO...I have spoken with the Mill Rep and the contractor and am heading in that direction tomorrow mid day. Depending on how much of a problem there is, I will most likely spend the night in Southern Cal.
Again, Many Thanks,......
Ed Vincent
Ed Vincent is offline   Reply With Quote
Old 12-12-2007, 12:55 PM   #6
Bill Vincent
Tile Contractor
 
Bill Vincent's Avatar
 
Join Date: Jan 2003
Location: Bridgton, Maine
Posts: 8,624
hey-- Do I know you?
__________________
Bill

"Whether you think you can, or you think you can't, you're probably right."

http://www.creativeceramicandmarble.com
Bill Vincent is offline   Reply With Quote
Old 12-12-2007, 02:28 PM   #7
John Corley
Registered User
 
John Corley's Avatar
 
Join Date: Nov 2004
Location: San Clemente, Ca
Posts: 1,607
Have fun in Wrong Beach
__________________
John
John Corley is offline   Reply With Quote
Old 12-12-2007, 03:50 PM   #8
cx
da Home-builder -- Moderator-at-Large
 
cx's Avatar
 
Join Date: Jul 2001
Location: Boerne, Texas
Posts: 85,157
Quote:
Originally Posted by Ed
...and I am looking for a certified inspector for tile...
Hey, Gobis, after all that money I gave you for my inspection course, am I "certified"?
__________________
CX

Y'ALL NEW VISITORS READ THIS HERE!
cx is offline   Reply With Quote
Old 12-12-2007, 04:40 PM   #9
ceramictec
Tampa Florida Tile Contractor
 
ceramictec's Avatar
 
Join Date: Oct 2007
Location: Tampa, Florida
Posts: 26,339
if anyone needs an Inspector in Honolulu Hawaii call me, I am readily available.
__________________
Brian
........
..........Tampa Florida Tile Installation
..............^^--Check out our Blog--^^
Tampa Installer of Laticrete HydroBan/HydroBan Board
......Tampa Installer of Schluter Kerdi/Kerdi-Board
..................."Tampa Waterproofed Tile Showers"
..............Porcelain - Travertine - Ceramic - Glass Tile
ceramictec is offline   Reply With Quote
Old 12-12-2007, 06:48 PM   #10
Marge
Registered User
 
Marge's Avatar
 
Join Date: Nov 2004
Location: Arizona
Posts: 14,636
am I "certified"?

Certifiable maybe.......
__________________
Marge------
Marge is offline   Reply With Quote
Old 12-12-2007, 08:28 PM   #11
Dave Gobis
da Man!
 
Dave Gobis's Avatar
 
Join Date: May 2001
Location: Racine, WI.
Posts: 5,230
I intentionally left that statement alone CX.
Dave Gobis is offline   Reply With Quote
Old 12-12-2007, 08:36 PM   #12
Bill Vincent
Tile Contractor
 
Bill Vincent's Avatar
 
Join Date: Jan 2003
Location: Bridgton, Maine
Posts: 8,624
Quote:
Certifiable maybe
What MAYBE??? That boy's a couple of sandwiches short of a picnic!!
__________________
Bill

"Whether you think you can, or you think you can't, you're probably right."

http://www.creativeceramicandmarble.com
Bill Vincent is offline   Reply With Quote
Old 12-12-2007, 09:20 PM   #13
cx
da Home-builder -- Moderator-at-Large
 
cx's Avatar
 
Join Date: Jul 2001
Location: Boerne, Texas
Posts: 85,157
y'all.

If I ain't certified, I want my money back, Dave.
__________________
CX

Y'ALL NEW VISITORS READ THIS HERE!
cx is offline   Reply With Quote
Old 12-12-2007, 09:25 PM   #14
Brad Denny
Tile Contractor Nashville, TN
 
Brad Denny's Avatar
 
Join Date: Mar 2007
Location: Joelton, TN
Posts: 4,160
I thought about taking the course as well. What training do you need to be a "certified" tile inspector, and how many inspections do you have to make to recoup the cost of the class?
__________________
Brad


Brad Denny is offline   Reply With Quote
Old 12-13-2007, 10:32 PM   #15
Dave Gobis
da Man!
 
Dave Gobis's Avatar
 
Join Date: May 2001
Location: Racine, WI.
Posts: 5,230
See Scott, LOL.
Dave Gobis is offline   Reply With Quote
Reply

Stonetooling.com   Tile-Assn.com   National Gypsum Permabase


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:33 PM.


Sponsors

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2014 John Bridge & Associates, LLC