View Single Post
Old 11-30-2017, 07:54 PM   #15
rmckee84
Moderator
 
Join Date: Feb 2012
Location: Southern Illinois
Posts: 2,440
Ideally you have a level that would go from corner to the drain, then measure how much fall you have by raising the end at the drain until it reads level. Or have a level on top of a straight edge that reaches from corner to drain. To see if the floor has low or high spots get a short straight edge and move it to various spots and see if it teeters or if you can see daylight under it indicating low spots.
__________________
Jack of most trades, master of none...
Ryan McKee
McKee Construction & Custom Tile
rmckee84 is online now   Reply With Quote