Thread: Mold
View Single Post
Old 01-27-2003, 01:26 PM   #1
flatfloor
"da Leveler"
 
flatfloor's Avatar
 
Join Date: Apr 2001
Posts: 18,280
Mold

This is an excerpt from a thread about mold. The auther is a member and an official with the Dallas Housing Authority.

4. so what works? According to the instructor of the mold class I attended, try a spray bottle with the following in it:

1/2 gal. white vinegar
1/2 gal. hydrogen peroxide-common peroxide available from your drugstore
1 cup boric acid
keep closed tightly
mix well - use in a spray bottle on a dry surface.


Shake well and spray area well. The vinegar/peroxide kills active live mold and the boric acid keeps them that way. (Note: uncapped peroxide loses it's oxygen molecules to the air when not capped tight and becomes H2O [water], so keep this solution in a bottle that can be capped off tight).

Instructor stated that boric acid works on mold bodies like it does on roach bodies - cuts them and they bleed to death because they cannot "coagulate" (snakes and snails and puppydog tails).

I guess we all know that there are some very beneficial molds, too.

One last note on the above solution. This solution will not "bleach" out the mold stain. After mold is under control, then you can bring out the bleach and whiten the mold stains.

For all you shower lovers!!!!

Slowbaker
__________________
Jim Buckley

This is as bad as it can get, but don't count on it.



Tile Calculator
New Here? Read this!

Last edited by flatfloor; 05-17-2006 at 11:24 AM.
flatfloor is offline