View Single Post
Old 07-06-2005, 10:51 PM   #7
NVC
Tile Contractor -- Napa, CA.
 
Join Date: May 2005
Location: Napa, CA
Posts: 1,714
I think what Jeff is saying is,

You cannot notch in the middle 1/3rd of the joists, but holes are OK if they are are 2" from the top or bottom and the dia. is no more than 1/3 the joist depth.

If they're off, you can re-route them to better positioning in the sisters'z. There is one 14-2 ? in the pic that looks like they drilled the hole a little low, but it could just be the angle.

Mark
NVC is offline   Reply With Quote