View Single Post
Old 03-26-2007, 07:55 PM   #5
Hamilton
Bucket abuser
 
Hamilton's Avatar
 
Join Date: Jan 2005
Location: Wildomar Ca
Posts: 9,177
After the water has been absorbed by the brick and no more puddles
are visible you can begin work. For this application a modified thinset
was used to bond deck mud (play sand mixed 4-5 parts sand to 1 part
portland cement) Un modified thinset will work fine but i chose to work
with what was on the job.
Using a medium notch trowel, 3/16" v-notch or similar cover the entire
surface of the brick with thinset. Proceed after this by covering the
thinset with deckmud quickly to prevent the thinset from drying
out or "skinning over".
Attached Images
   
__________________
Jack Hamilton

Hamiltontileandstone.com

Temecula Tile and Natural stone contractor
Hamilton is offline