StoneTech Sealer Help Expert/Rep

[rmelo99]

I applied StoneTech Heavy Duty sealer to my unfilled travertine before grouting. ( I may have done too little or very light)

Any how, I Just finised the last grout haze cleaning and notice that while the floor is wet the stone seams to "absorb" some water and change color. The natural paterns in the stone become more pronounced. Having seen this we've decided we like the "enhanced" look and colors of the stone better.

I would like to apply a "non-wet look" enhancer to achieve this look and bring out the variations in the stone more.

Can I still do this given what I've done and said up above?

If so what product should I use "Enhancer" , Impregnator, what?

Thread to my whole floor project
http://www.johnbridge.com/vbulletin/showthread.php?t=59781

[Sponsored Links]

[Stone Dude]

You want a color enhancing impregnator.

if youre going to use Stonetech, I would recommend the "enhancer pro" this will bring out the natural color of the stone without adding a shine.

[GeorgeT]

Enhancer Pro would be a good choice, and you might want to test the waterbased Rich Color Enhancer also.... they are both enhancing sealers but they can produce slightly different levels of enhancement...see which one looks best...
If you've got a little water absorption you can use either one.
Because there was a sealer already applied there is no way to know how much enhancment you'll get without testing...