Backsplash Sealer

[Mark Mandell]

Just full of questions today . . .

Have just ordered marble tile to complete the backsplash areas in the kitchen. Direct wet area behind the sink will be done in a single stainless steel sheet, but balance will be done in Solistone Modern "Opera" as in the photo. Component "bricks" are 1/2x3/4" no grouting to be done. It has been suggested that I soak the stuff in an acrylic penetrating sealer before the install, but I'm concerned about too much color change. Need Suggestions on a good sealer.

[Sponsored Links]

[The Kid]

I like bullet proof by stone tech. apply to face of stone with a painter brush give em a couple thin coats and set em.

I dont think i would soak them in the sealer, id be to affriad the sealer would break the bond between thinset and stone.