Cleaning Hard Water Stains

[Mike126]

I need some advice on how to clean hard water mineral deposits on carerra marble. I sealed the marble with the Stonetech heavy duty sealer when it was installed. Around the faucet, there are mineral deposits that do not clean with the Stonetech cleaner. Any suggestions?

Thanks!

[Sponsored Links]

[Stonehenge]

Hi Mike,

Purchase a box of single edge razors and use in conjunction with your diluted neutral cleaner. Hold your razor blade at an acute angle less than 45 degrees and with your diluted neutral cleaner acting as a lubricant carefully and lightly move this combination across the surface. Just remember to switch out your razor blades frequently so as to reduce the possibility of scratching.

[Mike126]

Stonehenge - I'll give that a try. I was hoping for the miricle cleaner/polisher. The area I have the mineral deposits is behind the faucet and up against the backsplash. Getting in there is a blade is going to be a little tricky.

Mike

[Davestone]

Unfortunately any chemica you use to remove the deposits will etch the marble and you'll have to refinish it.