polypebble pieces [Archive] - Ceramic Tile Advice Forums - John Bridge Ceramic Tile

PDA

View Full Version : polypebble pieces


Jessy
08-23-2007, 01:20 PM
Hi All,

I've got old polypebble on my lanai and around my pool deck in my new "old house" here in FL. Loose stones everywhere, obviously neglected for years... so once I've cleaned, swept, and vacuumed all I can up, what can I use to "glue" what's left on the floor in a permanent way? These pea-sized stones get tracked in the house, in the pool, and HURT between the toes!!
A liquid that could be spread or rollered out would be nice, but eventually UV may be an issue... Any thoughts? Thanks... Jess

Sponsored Links


Davestone
08-23-2007, 06:03 PM
Is this the yellow colored riverrock, Chatahoochie we call it, if so here's a website.......http://www.gulfcoastdecks.com/pooldecks/2007/05/06/river-rock-removal-chattahoochee-application/

doitright
08-23-2007, 09:42 PM
Hi Jessie, Welcome! :)

Here is a link to a website that manufactures epoxy for bonding the pebbles together. Thermal Chem (http://www.thermalchem.com/about_us.php)

It doesn't sound like the original installation was up to par.

Davestone
08-24-2007, 04:11 PM
Yeah, here's another, geez it's been 20 years since i did any,if this is even what you're talkin about,another problem is the sun breaks it down and dulls it,or used to....http://www.stonebondconstruction.com/epoxy.htm