Honed Botticino cleaning

[dkchicago]

Hi, I installed a kitchen floor (tiles, honed botticino) and sealed it with Miracle 511 Impregnator, penetrating sealer. But whenever anything fluid drops on the floor (even water, for example), it leaves a cloudy stain if not wiped out right away. Now there are few cloudy stain drops on the floor. I can't get rid of them.

How can I get these spots out? And do I need to use a different sealer? Any recommendations? I appreciate your help.

Dean

[Sponsored Links]

[Stonehenge]

Hi Dean,

Run a mock-up with porous plus version in the same manufacturers line of products.

Michael

[Davestone]

You may have put it on too thick, or left it on too long and it never fully dried.You could use a little more of the 511, and wipe it on the spots,not heavy,and see if that takes them out.In this situation you may have to strip the sealer off to alleviate the problem.