Hello everyone [Archive] - Ceramic Tile Advice Forums - John Bridge Ceramic Tile

PDA

View Full Version : Hello everyone


1 Bad Goat
02-06-2006, 10:13 PM
Hey everyone I'm new here, but my dad isn't. Hey dad just seeing if this works :scratch:

Sponsored Links


muskymike
02-06-2006, 10:58 PM
Hi Ken welcome to the forum! Your Dad is one KEWL Dad! :tup1:If anyone can teach you the trade he can!

Shaughnn
02-06-2006, 11:05 PM
Welcome to the mix, Ken. Neat avatar, but do you think you could find one where the wheels spin and smoke spews. That would be neat-er. :)
Shaughnn

Tool Guy - Kg
02-07-2006, 05:36 PM
Hi Ken, welcome!

With that avatar, I'm guessing your dad taught you to drive. :clap2:

John Bridge
02-07-2006, 05:44 PM
Welcome aboard, Ken. Glad to have ya. :)

cx
02-07-2006, 06:17 PM
Welcome, Ken. :)

Do not be advised by Shaughnn on avatar selection. :rolleyes:

opiethetileman
02-07-2006, 06:44 PM
who is his dad??????? welcome to the shack u need the goat to run from the 50 cal opie holds

Shaughnn
02-07-2006, 06:48 PM
Opie,
Who his dad is is a secret. But we'll leave you clues. :D
Shaughnn

davem
02-07-2006, 06:49 PM
Hi Ken, glad to have you. :)

flatfloor
02-07-2006, 07:11 PM
You got a goat? We have a :sheep: :yeah:

John Corley
02-07-2006, 08:27 PM
Welcome aboard Ken

Are you doing it right? (Opie)

Mike2
02-07-2006, 08:37 PM
Ken, beware. One of the moderators (at-large) 'round here (from Texas) pokes holes in goats. 'Course he calls it big game hunting...poor Billy. Listen up now: Keep your nose to the wind and your ears straight up. Don't want no arrow sticking in your heart. :shake:

Glad to have you onboard Ken. :tup2:

doitright
02-15-2006, 08:51 PM
:wave: Hi Ken :)

Good to see you finally registered! :tup2:

Yes Kurt, I did teach Ken to drive. We started by racing our Z-28 with the SCCA and TSSCA. We have even done course layouts, then test them with my van. That should explain why you and Mike had a hard time keeping up with me! :D

BTW, Ken did win a booby prize when we had a race event on the ice. He was the first and only car to come across the finish line backwards. Wish I had a picture of that one! :eek:

Shaughnn (or is that Shawn) :D

Ken's also a union tile setter. I must have been too tough on him! :whip:


Hey Dan :)

Do you know who his dad is now? :shades:

Rob Z
02-15-2006, 09:02 PM
Hi Ken,

We're glad to have you and your dad around here.

JK, where is that picture of you and Jr.? You could post it here again. :)

Levi the Tile Guy
02-15-2006, 09:16 PM
welcome aboard

cx
02-15-2006, 09:24 PM
I do not poke no holes in no steenkin' goats! :mad:

I do, however, sometimes provide guiding service for thems who do wish to poke such holes in such goats. Some pokes'em with bullets from afar, some with sharp sticks from not very far a-tall. But everbody gits a chance to poke one if he wants to. :shades:

Myownself, personally, I like my goats fine without no extra holes. But the goats got more than an even chance out there when it comes to hole-pokin'. Waaaay more than even most times. :)

And stop tryin' to derail the boy's first thread. :mad:

opiethetileman
02-16-2006, 04:46 AM
Yeah right i got it now . I am not the sharpest trowel in the pail. But I am Daytona bound tonite yeah buddy.

doitright
02-16-2006, 05:46 AM
Hi Dan :)

There is going to be some wild racing this afternoon, and through the weekend. Hope nobody gets hurt. Are you going to catch all the events? :shades: