marking tile [Archive] - Ceramic Tile Advice Forums - John Bridge Ceramic Tile


View Full Version : marking tile

william keller
08-14-2004, 12:00 PM
:bang: what do you mark jerusalem tile with i was using red and black crayon but it is awful hard to take off. is ther something better. i have to mark them to cut the thanks

Sponsored Links

08-14-2004, 12:02 PM
I couldn't find a grease pencil so have been using paint trim tape. works pretty well as long as your saw doesn't shoot the water out fast enough to move the tape.

08-14-2004, 08:18 PM
If the Jerusalem stone is honed I would use a regular #2 pencil, if it's polished I would use a grease pencil. :)

william keller
08-14-2004, 08:18 PM
:bow: good idea subscriber i am now using masking tape. i will know if it is okay when i start cutting. i laid the whole floor out first and marked what tiles i could without getting technical. thanks a lot.

william keller
08-15-2004, 04:39 AM
:yipee: thanks davy appreciate it