Wet travertine and water based sealer [Archive] - Ceramic Tile Advice Forums - John Bridge Ceramic Tile

PDA

View Full Version : Wet travertine and water based sealer


Monicakm
08-14-2004, 01:13 AM
DH is set to start cutting and installing the H&F travertine tomorrow :yipee: . I want to seal with AquaMix Gold before (and after) installation. He'll be using a water saw for cutting the tiles. I'm assuming he'll cut first and then seal. Do the tiles need to be completely dry before sealing?
Thanks guys,
Monica

Sponsored Links


tileguytodd
08-14-2004, 07:01 AM
YES!!!!!
Seal and allow to dry before cutting if thats what you are going to do.
Wash the dust off the surface of each pice and set out on a drop cloth.allow to dry. coat with sealer.Allow this to dry.now he can pick and choose his pieces for cutting.

The tiles will be dirty from the wetsaw and harder to clean after the sawing.
Think time management. sealing last night would have been a really good plan ;)